Enables the distance and angular relationship between two flanges to be adjusted, where a fixed flange supports three equi-spaced threaded shafts, and in parallel, a travelling flange has adjustable floating mounts. A typical application would be the final alignment of sample transfer arms.
The Port Aligner range enables the distance and angular relationship between two flanges to be adjusted. The range consists of five series, which can be supplied with either tapped or clear bolt holes on the flanges. Each range provides +/-5 mm axial length adjustment, with +/- 3° angular tilt.
Essentially, this is a simple device that once adjusted, provides a stable platform. The design consists of two approximately parallel flanges, one of which remains fixed, whilst the position of the second may be adjusted with respect to the first.

PA 1

PA35

PA64

PA100

PA150

PA200